- Shop
- >
- Z-Wave
- >
- Sensors & Security
- >
- FIBARO Z-Wave Smoke Sensor
FIBARO Z-Wave Smoke Sensor
SKU:
A$139.00
A$139.00
Unavailable
per item
Discontinued - The Philio Z-Wave Smoke Sensor is recommended
The Fibaro Smoke Sensor is a universal, optical Z-Wave smoke sensor. The device can be hard wired (12 or 24 VDC) or battery operated and can signal smoke detection through siren and LED blinking.
Product Code: RKM-SNS-SM-FIB
Manufacturer: Fibaro
Model: FGSS-001 (v2.3)
The Fibaro Smoke Sensor is a universal, optical Z-Wave smoke sensor. The device can be hard wired (12 or 24 VDC) or battery operated and can signal smoke detection through siren and LED blinking.
Product Code: RKM-SNS-SM-FIB
Manufacturer: Fibaro
Model: FGSS-001 (v2.3)
Sold Out
Product Details
The Fibaro Smoke Sensor features an optical sensor that detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. It is designed to operate in confined spaces and may be positioned on a wall or ceiling. The device also has a built-in temperature sensor, which can trigger the alarm once the specified temperature threshold is exceeded. The LED indicator signals fire, operating mode and Z-Wave network inclusion status.
Features
- Compatible with any Z-Wave Controller
- May be connected to any alarm or fire prevention system by hard wiring NC output
- Extremely easy installation - simply install it in location prone to fire
- Battery or VDC powered
- Built-in tamper switch
- Alarm is signaled by sound and LED diode
- Fire detection through air temperature measuring
- Can trigger alarm just by exceeding temperature threshold
- 3 levels of sensor sensitivity
- Automatic efficiency test performed every 5 seconds
- Built-in “black box” allows the device to report and record smoke and temperature readouts
Read about some of the great benefits of a Z-Wave smoke detector.
IMPORTANT: Z-Wave smoke detectors do not carry any formal Australian certification and must therefore never be used as your primary smoke detection device.
IMPORTANT: Z-Wave smoke detectors do not carry any formal Australian certification and must therefore never be used as your primary smoke detection device.
Product Support
Technical Specifications
- Radio Frequency: 921.42 MHz (AU/NZ Z-Wave)
- Battery Type: CR123A battery, 3.6 VDC
- Operation Range: Up to 30m indoors
- Power Consumption: 0,4W
- Operation Temperature: 0-40C
- Measured Temperature Range: -20 to 100C
- Temperature Measuring Accuracy: 0,5C (within 0C - 40C range)
- Housing: ABS
- Size (Diameter x Height): 65 x 28 mm