- Shop
- >
- Z-Wave
- >
- Sensors & Security
- >
- Vision Z-Wave Smoke Sensor Adapter
Vision Z-Wave Smoke Sensor Adapter
SKU:
A$59.00
A$54.00
A$54.00
Unavailable
per item
NEW! Protect your family and home with this battery operated Z-Wave Smoke Sensor Adapter.
Operating in parallel with your existing smoke sensor, you can now integrate any smoke sensor connected to your Z-Wave network allowing you to receive an instant notification in an emergency, wherever you are.
Product Code:Â RKM-SNS-SMAD-VISÂ
Manufacturer: Vision
Operating in parallel with your existing smoke sensor, you can now integrate any smoke sensor connected to your Z-Wave network allowing you to receive an instant notification in an emergency, wherever you are.
Product Code:Â RKM-SNS-SMAD-VISÂ
Manufacturer: Vision
Description
More Info
Support
Description
Vision Z-Wave Smoke Sensor Adapter
The Vision Z-Wave Smoke Sensor Adapter responds to the high frequency siren sound emitted by your standard smoke or CO detectors.
Upon detection of the siren the device will trigger an alarm response, allowing you to send notifications to other devices on your Z-Wave Network or to your smart phone.
The Vision Z-Wave Smoke Sensor Adapter is easy to install and set-up with mounting screws included.
When the sensor is triggered it will send a binary ON/OFF command wirelessly using a Z-Wave enabled (AUS/NZ version 921.42 MHz) transmitter to assigned controllers, switches, window winders etc. The sensor can be used to automatically turn on fans, turn wireless switches ON/OFF and for security applications within the Z-Wave network.
Integrates with most Australian Z-Wave certified (921.42MHz) controllers.
Upon detection of the siren the device will trigger an alarm response, allowing you to send notifications to other devices on your Z-Wave Network or to your smart phone.
The Vision Z-Wave Smoke Sensor Adapter is easy to install and set-up with mounting screws included.
When the sensor is triggered it will send a binary ON/OFF command wirelessly using a Z-Wave enabled (AUS/NZ version 921.42 MHz) transmitter to assigned controllers, switches, window winders etc. The sensor can be used to automatically turn on fans, turn wireless switches ON/OFF and for security applications within the Z-Wave network.
Integrates with most Australian Z-Wave certified (921.42MHz) controllers.
More Info
RF Protocol
Z‐Wave Plus 700 Series RF Frequency 921.42Mhz ‐ AU/NZ approved RF for Z‐Wave Z‐Wave Device Type Z-Wave Binary Sensor Power 1 CR123A battery (Included with Device) Hardware CPU: Intel Atom 1.6 GHz Processor, 1 GB RAM, 2GB SLC Hard Drive, 4GB MLC Recovery Disk Application Indoor use only Operation Temperature 0 ~ 55 °C Storage Temperature -10 ~ 80 °C Weight 90g Housing ABS |
Support

User Manual | |
File Size: | 3324 kb |
File Type: |