Qubino Z-Wave Tubular Motor Controller DC
SKU:
A$99.00
A$99.00
per item
The Qubino Flush Shutter DC by GOAP is the world's smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.​
Product Code: RKM-WIN-BLW-QUB​-DC
Manufacturer: GOAP/QUBINO
Model: Flush Shutter DC
Sold Out
Description
More Info
Support
Description
GOAP Z-Wave Tubular Motor Controller DC
The Qubino Flush Shutter DC by GOAP is a Z-Wave Plus (500 series) controller for 12-24V DC blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) gateway. It will also report the motor's actual power (Watts) and total power consumption (kWh). This device supports precise positioning for motors equipped with mechanical or electronic switches.
Please Note
IMPORTANT: Please check the maximum load before installing or operating. This device must be installed by a certified electrician. For all warranty claims, an electrical compliance certificate from your electrician must be provided.
Please Note
- Supports mono-stable switches (push button) and bi-stable switches and is factory set to operate with bi-stable switches
IMPORTANT: Please check the maximum load before installing or operating. This device must be installed by a certified electrician. For all warranty claims, an electrical compliance certificate from your electrician must be provided.
More Info
|
RF Protocol
Z‐Wave Plus (500 series chip) RF Frequency 921.42Mhz ‐ AU/NZ approved RF for Z‐wave Z‐Wave Device Type Z-Wave binary switch, routing slave Power 12-24V DC ± 10% Rated Load Current 2A Over Current Protection 5A Output Circuit Power of DC Output (resistive load) 48W (24V DC) Operation Range Up to 30m indoors (with no obstacles) Application Indoor use only Operation Temperature 10 ~ 40 °C Storage Temperature ‐10 ~ 60 °C Weight 30g Dimensions 41.8mm x 36.8mm x 16.9mm |
|
Support
| Vera Configuration Guide |
