zConnect Z-Wave Garage Door Controller
SKU:
A$99.00
A$99.00
per item
The zConnect Garage Door Controller pairs with your existing automatic garage door opener to provide wireless remote control from anywhere.Â
Product Code:Â RKM-ZCO-WIN-GDC
Manufacturer: Digital Home Systems
Model: ZCO-WIN-GDC
Description
More Info
Support
Description
zConnect Z-Wave Garage Door Controller
The zConnect Garage Door Controller is a Z-Wave controlled module with two low voltage relays on board, two dry contact inputs, S-Bus port for external devices and sophisticated firmware to support multiple functions.
You can attach optional external devices to get audible and visual warnings to alert those nearby of the door's impending movement. This includes binary and multilevel sensors, IR beam sensors, etc., which can report the garage door's open or closed status to your Z-Wave Gateway.
The zConnect Garage Door Controller also works as a repeater for your Z-Wave network.
Please note: This device will work only with garage door motors supporting dry contacts for the optional wall switch. Refer to your garage door motor manual before purchasing. This device is designed and assembled in Australia.
You can attach optional external devices to get audible and visual warnings to alert those nearby of the door's impending movement. This includes binary and multilevel sensors, IR beam sensors, etc., which can report the garage door's open or closed status to your Z-Wave Gateway.
The zConnect Garage Door Controller also works as a repeater for your Z-Wave network.
Please note: This device will work only with garage door motors supporting dry contacts for the optional wall switch. Refer to your garage door motor manual before purchasing. This device is designed and assembled in Australia.
More Info
|
RF Protocol
Z-Wave, SDK version: 6.51.03 RF Frequency 921.42Mhz ‐ AU/NZ approved RF for Z‐wave Application Indoor use only, for outdoor use watertight plastic box Power 5-24 VDC Operation Range Up to 45m indoors with no obstacles Enclosure Plastic Comliance EN 60669-2-1 Operating Temp. -10C ~ +40C Dimensions 18mm x 48mm x 37mm |
|
Support
| User Manual and Installation Guide |
Optional multilevel sensors like temperature, PIR, humidity, luminosity and energy can be connected to the zConnect Z-Wave Garage Door Controller via S-Bus. Please note: Only one type of multilevel sensor can be connected at time and must be done prior to inclusion into the Z-Wave network. If you need to change the sensor to different type, please exclude device from the Z-Wave network first and then re-include it.
