Qubino Z-Wave Thermostat 2
SKU:
A$99.00
A$78.00
A$78.00
per item
The Qubino Thermostat 2 is a wireless heating and hot water on/off controller. This amazingly tiny module is ideal for wireless control of electric or water-based underfloor heating systems, electric water heaters, hot water pumps, and electric radiators.
Features
Product Code:Â RKM-HVAC-THR-QUB-02
Manufacturer: GOAP/QUBINO
Model: Flush On/Off Thermostat 2
Features
- Z-Wave Plus certified, Security S2, SmartStart ready
- Includes digital temperature sensor
- Can measure the power consumption of connected device (within 3% accuracy)
- Extremely low energy consumption (less than 0.4W)
- Frost free mode: Specifies a minimum temperature for the heating system connected to the module to prevent your pipes from freezing
Product Code:Â RKM-HVAC-THR-QUB-02
Manufacturer: GOAP/QUBINO
Model: Flush On/Off Thermostat 2
Description
More Info
Support
Description
Qubino Z-Wave Thermostat 2
The Qubino Flush Thermostat 2 can be used to directly control electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches. The device also measures power consumption and supports the connection of a digital temperature sensor.
This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers including Fibaro Home Center 2/Lite, Fibaro Home Center 3/Lite and other major controllers outlined in this matrix provided by the manufacture.
Schedule heating to fit your lifestyle
IMPORTANT: Please check the maximum load before installing or operating. This device must be installed by a certified electrician. For all warranty claims, an electrical compliance certificate from your electrician must be provided.
This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers including Fibaro Home Center 2/Lite, Fibaro Home Center 3/Lite and other major controllers outlined in this matrix provided by the manufacture.
Schedule heating to fit your lifestyle
- Set schedules to adjust the temperature of your home to your lifestyle.
- Automatically turn your smart heating system off after you leave in the morning and turn it back on remotely before you return home.
- Set a schedule for your home to welcome you adequately warm before returning from holidays.
- Connect scheduling to a temperature sensor to trigger the heating system to turn on occasionally to prevent the temperature to drop let’s say bellow 15°C [59°F].
- Your home will always welcome you with optimal temperature, no matter how long you’ll be away.
IMPORTANT: Please check the maximum load before installing or operating. This device must be installed by a certified electrician. For all warranty claims, an electrical compliance certificate from your electrician must be provided.
More Info
|
RF Protocol
Z‐Wave Plus (500 series chip), Security S2 SmartStart ready, Z-Wave Repeater RF Frequency 921.42Mhz ‐ AU/NZ approved RF for Z‐Wave Z‐Wave Device Type Z-Wave binary switch, routing slave Power Supply 230V AC ± 10% OR 24-30V DC Rated Load Current of AC Output (resistive load) 1 x 10A / 230V AC Rated Load Current of DC Output (resistive load) 1 x 10 A / 30V DC Output circuit power of AC output (resistive load) 2300W (230V AC) Output circuit power of DC output (resistive load) 240W (24V DC) Operation Range Up to 40m indoors (with no obstacles) Application Indoor use only Operation Temperature -10 ~ 40 °C Digital Temperature Sensor Cable Length 1000 mm Weight 48g Dimensions 41.8mm x 36.8mm x 16.9mm |
|
Support
